Order no.: 0236910

ECM-300DT

P_DANTE P1557 P1544
Order no.: 0236910

ECM-300DT

The wired, Dante®-enabled gooseneck microphone can conveniently be integrated into a Dante® Audio over IP network and provides an excellent voice transmission for fixed installations in shops, hotels, in pubs and restaurants, in schools or indoor sports facilities. The installation is quite easy: the desktop microphone is connected to the network via the RJ45 jack and supplied with power via Ethernet cable (PoE). The free software 'Dante® Controller' allows you to determine which Dante®-enabled receiver is recipient of the routed audio signals. It is possible to transmit uncompressed and synchronised digital audio signals with virtually no latency. The touch-sensitive microphone button allows you to select the following operating modes: PTM, PTT, on/off and off/on. It is also possible to activate the 3-step attenuation which is separately selectable in case of high-volume signal sources.
PA desktop microphone (push-to-talk) with integrated Dante® module
  • Electret, hypercardioid polar pattern
  • Selectable operating modes: push-to-mute (PTM), push-to-talk (PTT), on/off, off/on
  • Low cut switch
  • Switchable attentuation: -10/-20/-30 dB
  • Encoding: 16/24/32 bits
  • Sampling rates: 44.1/48/88.2/96 kHz
  • RJ45 jack for connection to a Dante® network
  • Power supply via PoE (Power over Ethernet)

System requirements Dante®: Windows 7/8.1/10 or MacOS 10.9.5/10.10.5/10.11

The brand Dante® as well as the Dante® software which may have been integrated into these products are licenced by Audinate Pty Ltd.
Manufacturer information:
MONACOR INTERNATIONAL GmbH & Co. KG
Konsul-Smidt-Str. 68
28217 Bremen
Germany
info@monacor.com
Safety Notes and Warning Messages
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.
continue

About

The wired, Dante®-enabled gooseneck microphone can conveniently be integrated into a Dante® Audio over IP network and provides an excellent voice transmission for fixed installations in shops, hotels, in pubs and restaurants, in schools or indoor sports facilities. The installation is quite easy: the desktop microphone is connected to the network via the RJ45 jack and supplied with power via Ethernet cable (PoE). The free software 'Dante® Controller' allows you to determine which Dante®-enabled receiver is recipient of the routed audio signals. It is possible to transmit uncompressed and synchronised digital audio signals with virtually no latency. The touch-sensitive microphone button allows you to select the following operating modes: PTM, PTT, on/off and off/on. It is also possible to activate the 3-step attenuation which is separately selectable in case of high-volume signal sources.
PA desktop microphone (push-to-talk) with integrated Dante® module
  • Electret, hypercardioid polar pattern
  • Selectable operating modes: push-to-mute (PTM), push-to-talk (PTT), on/off, off/on
  • Low cut switch
  • Switchable attentuation: -10/-20/-30 dB
  • Encoding: 16/24/32 bits
  • Sampling rates: 44.1/48/88.2/96 kHz
  • RJ45 jack for connection to a Dante® network
  • Power supply via PoE (Power over Ethernet)

System requirements Dante®: Windows 7/8.1/10 or MacOS 10.9.5/10.10.5/10.11

The brand Dante® as well as the Dante® software which may have been integrated into these products are licenced by Audinate Pty Ltd.
Manufacturer information:
MONACOR INTERNATIONAL GmbH & Co. KG
Konsul-Smidt-Str. 68
28217 Bremen
Germany
info@monacor.com
Safety Notes and Warning Messages
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity and heat (admissible ambient temperature range: 0 - 40 °C).
If the unit is to be put out of operation permanently, take it to a local recycling plant for a disposal which is not harmful to the environment.

Specifications

Description PA desktop microphone (push-to-talk)
Transmission method Dante® network
Polar pattern hypercardiod
System electret
Audio frequency range 50-16,000 Hz
Nominal impedance 250 Ω
Sensitivity 10 mV/Pa
S/N ratio 139 dB
Power supply PoE
Gooseneck length 310 mm
Admiss. ambient temp. 0-40 °C
Dimensions 90 x 40 x 130 mm (console housing )
Weight 876 g
Connection RJ45
Packaging dimensions (W x H x L) 0.21 x 0.065 x 0.485 m
Gross weight 1.178 kg
Net weight 0.876 kg
EAN code 4007754258608
Net weight 0.876 kg
Sampling rates 44.1/48/88.2/96 kHz
Resolution 16/24/32 bits

Downloads

Accessories for ECM-300DT

Peak output power:
60 W
Power rating:
40 W
Power rating at 100 V:
40 W
Order no.: 0176070
AKB-160DT
PA amplifier module
Login
Peak output power:
160 W
Power rating:
120 W
Power rating at 4 Ω:
120 W
Order no.: 0176080
PA-900DT
Mono PA mixing amplifier with Dante® module
Login

Services

SERVICE
Product & Purchasing Advice
+49 421 4865 512
export@monacor.com
SERVICE
Technical project management
+49 421 4865 512
export@monacor.com
SERVICE
Repair Service
+49 40 853 999-717
support.monacor@sertronics.de
SERVICE
Training at the MONACOR Academy
+49 421 4865 701
academy@monacor.com
Contact
You can send us your question or request here.
DE
DK
NL
BE
PL
ES
CH
WORLD