About
The PSM8WJB is a unidirectional, addressable condenser paging microphone for PRIMA-VA systems.
It features eight zone selection buttons and a slim gooseneck microphone, combining durability with an attractive design in a robust housing.
The PSM8WJB enables live announcements and playback of recorded messages in all pre-assigned zones. The paging station features a gooseneck microphone, a push-to-talk button, zone selection buttons, and a monitor loudspeaker. Each button can represent either an individual zone or a group of zones and can be easily assigned in the software using a straightforward matrix selection. All buttons can be programmed via drag-and-drop functions in the software, and each button can be configured for either PTT (push-to-talk) or latching operation.
In accordance with BS 5839, the PSM8WJB is monitored via RS-485. The RS-485 communication protocol allows units to be daisy-chained over distances of up to 300 m using a single CAT 5 cable (FTP/STP). Each station can be easily connected using standard RJ45 connectors and the junction box supplied with the PSM8WJB.
The PSM8WJB enables live announcements and playback of recorded messages in all pre-assigned zones. The paging station features a gooseneck microphone, a push-to-talk button, zone selection buttons, and a monitor loudspeaker. Each button can represent either an individual zone or a group of zones and can be easily assigned in the software using a straightforward matrix selection. All buttons can be programmed via drag-and-drop functions in the software, and each button can be configured for either PTT (push-to-talk) or latching operation.
In accordance with BS 5839, the PSM8WJB is monitored via RS-485. The RS-485 communication protocol allows units to be daisy-chained over distances of up to 300 m using a single CAT 5 cable (FTP/STP). Each station can be easily connected using standard RJ45 connectors and the junction box supplied with the PSM8WJB.
Desktop paging station for announcements
- Desktop housing
- Monitored CAT 5 connection to controllers and secondary units
- Microphone capsule monitoring, except on secondary units
- Automatic gain control (AGC) at the microphone input
- Eight zone selection buttons, expandable with additional keypads
- All-call button
- Power, EVAC, status, and fault indicators
- Integrated monitor loudspeaker
Manufacturer information
ATEÏS Deutschland GmbH
Bahnhofstr. 18
74906 Bad Rappenau
Germany
info.de@ateis.global
www.ateis-deutschland.de
Bahnhofstr. 18
74906 Bad Rappenau
Germany
info.de@ateis.global
www.ateis-deutschland.de
Safety and warning notices
Only use the device indoors and protect it from dripping and splashing water, high humidity and heat (permissible operating temperature range 0 - 40 °C).
Do not operate the appliance if there is visible damage to the appliance, if a defect is suspected after a fall or similar, or if malfunctions occur. Always return the appliance to a specialised workshop for repair.
If the appliance is to be taken out of service permanently, hand it over to a local recycling centre for environmentally friendly disposal.
Do not operate the appliance if there is visible damage to the appliance, if a defect is suspected after a fall or similar, or if malfunctions occur. Always return the appliance to a specialised workshop for repair.
If the appliance is to be taken out of service permanently, hand it over to a local recycling centre for environmentally friendly disposal.
